Leaderboard

that may be, but that ship has sailed. I'll just enjoy "what could have been" in the Regal...

Four bolts hold the bumper on. Remove those and the whole front comes off. The bumper is quite large, but not too heavy. You can strip the plastic parts off to get to the entire bumper. Get some aviation stripper and the top layer can be removed. I took mine to a polisher and they polished them. I only had the part that shows polished because the plastic covers the rest. Like I said before, I use "Whiter Diamond' polish to keep them shiny. Keep your and everyone else's hands off, as the oil from your fingers leaves marks on the bare metal.

You, can use any small air-tight tank to replace the vacuum tank.

The servo was used on multiple GM cars in multiple years. take a walk through a you pick yard and look for a lower mileage Buick. Once you get it off suck on the big hose nipple. If it holds while you have vacuum on it, it probably is good.