Leaderboard

It's cold in East TN! We have 6-1/2" of snow on the ground. Temps expected to drop to -4 by morning. That's nuts for us. I don't remember it ever being that cold here. Schools, banks and most stores in the small town I live in are shut down. Hardly a car on the streets but I-40 is still moving. We'll be fine if the electricity doesn't go off. Faucets will be dripping here tonight! 🙂

Welcome to the forum. The link below shows the location of the grounds. Reatta Owners Journal - Ground Terminals & Junction Box Location

It's 90 and sunny here in Cambodia. No snow anywhere!

Jim Finn, reattas60@gmail.com, has been in the used Reatta parts business for many years. I have purchased parts from him several times. He has fair prices and he is honest.

Starter comes out of the bottom. Sent to you from Hanoi, Vietnam...

Basically the same. On a Reatta, there is also a removable vented plastic panel in the space between the crossmember and the radiator. It is hard to know for certain based on those camera angles, but I am pretty sure there is less space available forward of the crossmember on a Reatta. That appeared to be standard type starter and all of the Reatta's where I have accessed the starter are a bit smaller gear reduction types. Both types appear in the FSM, al least for 1990. I honestly cannot remember if there is sufficient room to pull the starter out the bottom as shown or if I had to take it out the top after removing the puller cooling fan😖