Not a lot changed in the attached photos but some things did get done. The big bracket on the front is now bolted on with loctite. I did replace the water pump although it took three different FLAPS to find one in stock. It was a good time to add the oil pickup and new oil pan. I have all the pan bolts from the s/c donor but of course the thread size was changed to 1/4” vs 5/16” at some point so I wound up getting socket head screws with washers to install the pan. Not really a big issue, just wasted time. Much of the rest of the time was spent cleaning parts to be reused. The valve covers look pretty good but not perfect by any means. I do not want to paint them and I want to use the ones from the donor because they do not have a grommet hole for the external vent for pvc system. I will recondition the bearings in the idlers and tensioners to get things mocked up but I decided to order new ones as well for $25.