Leaderboard

Today Bob and I reinstall the dash. Kendall found the short. It was in the loom of wires that run in front of the engine from the dash to the cornering lamps. In this case the passenger side. He also closely inspected the taillight bulbs and found 4 that were "bad" The filiment in these 4 bulbs were touching each other and didn't look right, so out they went. We did set the dash in place so we could reconnect the junction box of wires and then test our work. We ran all the tests, high/low beams, taillights, brake lights, running lights, fog lights, and directionals. All good...

Today Bob and I removed the dash so that Kendall can run down the short I have in the 'vert. he has every confidence that he can get this done. Took us about 90 minutes to get the dash out. Although I cheated by already having the top pad and console out to make the dash removal go a little faster.