Cberry1962 Posted December 8, 2020 Share Posted December 8, 2020 My father was assistant chief engineer on the Reatta program. He has since passed away and left me with many photos of early design work spanning 1984 - 1986. Some photos are when they were in the United Kingdom working with Hawtal Whiting on design aspects. Not sure if anyone would have interest in these photos as a historical aspect to go with their Reatta. Unfortunately they are all Kodak prints and not in digital format. I took photos with my cell phone and uploaded a sample of the over 100 photos that I have in total. 2 3 Link to comment Share on other sites More sharing options...
Ronnie Posted December 8, 2020 Share Posted December 8, 2020 Welcome to the forum!!! Thank you for posting the photos. I would love to have any photos that you might have. You can email me . I can scan the photos and post them here to share with members of the forum. 2 Link to comment Share on other sites More sharing options...
Ronnie Posted December 8, 2020 Share Posted December 8, 2020 Great photos. I look forward to getting more. As a machinist I find all the photos that show how the Reatta is constructed interesting. The one below is especially interesting. It shows the prototype had something other than the 3800 engine that was used in production. Take a look at the valve covers and the location of the coils. Maybe an older 3.8? Maybe a 3.1? Also it appears to have a standard brake system instead of the TEVES. Link to comment Share on other sites More sharing options...
2seater Posted December 9, 2020 Share Posted December 9, 2020 13 hours ago, Ronnie said: Great photos. I look forward to getting more. As a machinist I find all the photos that show how the Reatta is constructed interesting. The one below is especially interesting. It shows the prototype had something other than the 3800 engine that was used in production. Take a look at the valve covers and the location of the coils. Maybe an older 3.8? Maybe a 3.1? Also it appears to have a standard brake system instead of the TEVES. Great photos to be sure! I would think that is an LG3 3.8 engine, the predecessor of the 3800, which didn't exist at the time. One of GM's first models of a fwd V6. Not only a standard brake system but the whole firewall is a blank slate so to speak. Thanks for sharing Link to comment Share on other sites More sharing options...
Ronnie Posted December 17, 2020 Share Posted December 17, 2020 On 12/8/2020 at 2:35 PM, Cberry1962 said: Not sure if anyone would have interest in these photos as a historical aspect to go with their Reatta. Unfortunately they are all Kodak prints and not in digital format. Thank you for sending me the photos. They are much appreciated. I hope you will come back and visit us often. 2 Link to comment Share on other sites More sharing options...
Cberry1962 Posted December 20, 2020 Topic Author Share Posted December 20, 2020 Absolutely, I am glad there is a forum to keep the Reatta tradition going strong. Maybe I will convince my wife that we should buy a Reatta, have been looking at them online lately. 2 Link to comment Share on other sites More sharing options...
Ron Walker Posted February 12, 2021 Share Posted February 12, 2021 Just noticed this post. The photos are great and thankfully preserved pretty well for cell phone shots of old Kodak print. (I printed the two showing the "inards" of the door - may allay some fear of replacing that exterior door handle.) Pride goes both ways - Cberry1962 can be proud of his father for his part in engineering this fabulous vehicle, and, I'm sure Cberry1962's father is proud of him for sharing these photos with a bunch of people that like to see the Reatta carry on. 2 Link to comment Share on other sites More sharing options...
Bertimus Posted February 12, 2021 Share Posted February 12, 2021 These are absolutely amazing 1 Link to comment Share on other sites More sharing options...
Philbo Posted February 13, 2021 Share Posted February 13, 2021 Love seeing the old photos. Thanks for sharing! 1 Link to comment Share on other sites More sharing options...
Ronnie Posted February 13, 2021 Share Posted February 13, 2021 Cberry1962 was kind enough to send me all his father's photos. the must be about a hundred of them. Cberry1962 has already post the ones that most people would be interested in. Most of the ones that haven't already been posted are of views of pieces of the car as they were being developed. I intend to post some more of the photos when I get time to scan them into my computer so they can be posted here. 4 2 Link to comment Share on other sites More sharing options...
Cberry1962 Posted April 8, 2021 Topic Author Share Posted April 8, 2021 I am so glad that these photos have received so many views and many positive comments. My father was a true "car guy", loved cars and enjoyed working working on them and sharing everything he knew about cars. Even though he passed away, he lives on forever every time when I see a Reatta driving down the street. The uniqueness of the Reatta has made it a true classic collector's car. 2 2 Link to comment Share on other sites More sharing options...
BlakesReatta Posted July 21, 2021 Share Posted July 21, 2021 Love seeing this! Thanks for sharing. Those wire wheels on the Reatta are a unique look! I love wire wheels but think the Reatta is too futuristic/modern for that look. But interesting to see the car in development. 1 Link to comment Share on other sites More sharing options...
Kevindjac Posted September 24, 2021 Share Posted September 24, 2021 (edited) These pics are awesome love them cberry thanks for sharing! Edited September 24, 2021 by Kevindjac Misspelling 1 Link to comment Share on other sites More sharing options...
Ronnie Posted September 24, 2021 Share Posted September 24, 2021 30 minutes ago, Kevindjac said: These pics are awesome love them cberry thanks for sharing! That reminds me that I have dozens more of these photos that CBerry1962 sent to me that I need to scan and post here on the forum. Sorry for procrastinating so long. Link to comment Share on other sites More sharing options...
Padgett Posted September 25, 2021 Share Posted September 25, 2021 Know I've seen those three bolt valve covers but just don't know where. Link to comment Share on other sites More sharing options...
Recommended Posts