TripleC321 Posted April 5 Share Posted April 5 This sensor is loose, and kinda slides in and out a small amount. No errors or codes present on car. It’s a 1988. Is this loose sensor an issue? What sensor is it? video link: https://share.icloud.com/photos/0b2zwjgl5vsmu7rrb295hql-g Link to comment Share on other sites More sharing options...
Ronnie Posted April 5 Share Posted April 5 That looks like the connector for the transmission. If so, it's not unusual for it to move around in the transmission case. It's not actually a sensor. The wires in the connector go to switches inside the transmission to tell the ECM what gear the transmission is in. One of the wires in that bundle goes to the lockup torque converter solenoid to lock the converter when it gets a signal from the ECM. 2 Link to comment Share on other sites More sharing options...
TripleC321 Posted April 5 Topic Author Share Posted April 5 I uploaded a video at the link showing it’s “wiggle.” so it’s normal and nothing to be concerned about? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now