TripleC321 Posted April 5, 2024 Share Posted April 5, 2024 This sensor is loose, and kinda slides in and out a small amount. No errors or codes present on car. It’s a 1988. Is this loose sensor an issue? What sensor is it? video link: https://share.icloud.com/photos/0b2zwjgl5vsmu7rrb295hql-g Link to comment Share on other sites More sharing options...
Ronnie Posted April 5, 2024 Share Posted April 5, 2024 That looks like the connector for the transmission. If so, it's not unusual for it to move around in the transmission case. It's not actually a sensor. The wires in the connector go to switches inside the transmission to tell the ECM what gear the transmission is in. One of the wires in that bundle goes to the lockup torque converter solenoid to lock the converter when it gets a signal from the ECM. 2 Link to comment Share on other sites More sharing options...
TripleC321 Posted April 5, 2024 Topic Author Share Posted April 5, 2024 I uploaded a video at the link showing it’s “wiggle.” so it’s normal and nothing to be concerned about? 1 Link to comment Share on other sites More sharing options...
Recommended Posts