Kevindjac Posted September 1, 2021 Share Posted September 1, 2021 (edited) The plug for the A/C compressor has been unplug since I got the car, just trying to find out exactly where it plugs in, have felt all around but no luck in finding it! TIA Edited September 1, 2021 by Kevindjac Link to comment Share on other sites More sharing options...
2seater Posted September 1, 2021 Share Posted September 1, 2021 I imagine what you are asking is the location of the electrical plug for the air conditioning compressor? It is right on top just behind the clutch but I will bet Ronnie will have one of his excellent photos. 1 Link to comment Share on other sites More sharing options...
Kevindjac Posted September 1, 2021 Topic Author Share Posted September 1, 2021 Thanks 2 seater sorry I didn't say more clearly! Link to comment Share on other sites More sharing options...
Padgett Posted September 1, 2021 Share Posted September 1, 2021 Should say is usually on top between the clutch and the front of the compressor but a replacement cold be clocked differently. Also make sure the compressor Center of clutch) turns freely first, it might have been disconnected for a frozen compressor. Link to comment Share on other sites More sharing options...
Kevindjac Posted September 1, 2021 Topic Author Share Posted September 1, 2021 Yeah it turns freely! Link to comment Share on other sites More sharing options...
Ronnie Posted September 1, 2021 Share Posted September 1, 2021 Welcome to the forum Kevindjac. Padgett provided a good photo that can be found here: Compressor Connector Differences It shows the location of the power connector for the compressor. 2 Link to comment Share on other sites More sharing options...
Kevindjac Posted September 2, 2021 Topic Author Share Posted September 2, 2021 Thank you very much Padgett and Ronnie it is very much appreciated, I'll check it out tomorrow after work or maybe this weekend, so the connection is on top correct? 1 Link to comment Share on other sites More sharing options...
Padgett Posted September 2, 2021 Share Posted September 2, 2021 Should be, is only one connector at front of compressor. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts