IMPORTANT NOTICE:
We are not experts or professionals in any field. Any advice or information found on this website should not be considered as 100% accurate and is provided on an AS-IS basis. Use any information you find here at your own risk. Click here and carefully read and agree to the DISCLAIMER statements before using any information found on this website. 
Camaro Muffler Installation
 Tuesday, 22 September 2009 The photo below should be self explanatory and should provide the information needed to install a Camaro muffler on a Reatta.
I suggest that anyone wanting to install the Camaro muffler on a Reatta look at the muffler before installing. Look into the single end (that will be used as the inlet) and make sure it is not straight thru. If it is, it will be too loud for most Reatta owners. I have a couple of exhaust catalogs and they say you can use any of the ports as inlets or outlets. I'm not sure ALL mufflers are made that way.Click here to see a larger view of the photo below. 
Last Updated Monday, 12 September 2011
IMPORTANT NOTICE: We are not experts or professionals in any field. Any advice or information found on this website should not be considered as 100% accurate and is provided on an AS-IS basis. Use any information you find here at your own risk. Click here and carefully read and agree to the DISCLAIMER statements before using any information found on this website. |
Help Support UsYour donation to help support the services this website provides is appreciated.
Advertisements   Latest Tips and Tutorials |
|
"The Buick Reatta has a pleasing, contemporary shape that causes heads to swivel. The more time I spend behind the wheel, the more attached I become to this jaunty two-seater." Paul Lienert - The Detroit Free Press. |
(Comments must be approved by the website administrator before they are published)