Advertisement
IMPORTANT NOTICE:
We are not experts or professionals in any field. Any advice or information found on this website should not be considered as 100% accurate and is provided on an AS-IS basis. Use any information you find here at your own risk. Click here and carefully read and agree to the DISCLAIMER statements before using any information found on this website.




back button
How To Verify Mileage on '88 & '89 Models
Print 
Written by Jim Finn - AACA Reatta Forum
Saturday, 13 December 2008
 
On the Reattas with the touch screen you can verify the mileage by reading out the VIN from the CRT and compare it to the VIN near the windshield. Since the mileage is stored in a chip in the BCM and that chip also stores the VIN. 

If the VIN in the BCM matches the one by the windshield the mileage is correct.

You cannot do this on the '90-'91 models. The VIN will not read out where the odometer normally is.

 

Last Updated Sunday, 13 December 2009

Add your comments:

Please use the form below to add your comments or corrections to this article.
(Comments must be approved by the website administrator before they are published)

Comment:


Security code Click here to refresh security code

Enter security code in the box below

< Prev   Next >


IMPORTANT NOTICE:
We are not experts or professionals in any field. Any advice or information found on this website should not be considered as 100% accurate and is provided on an AS-IS basis. Use any information you find here at your own risk. Click here and carefully read and agree to the DISCLAIMER statements before using any information found on this website.


Help Support Us

Enter Amount:

Advertisements

 
Click here for more info.
Your ad here

(Click the page numbers above for more Reatta parts)