IMPORTANT NOTICE:
We are not experts or professionals in any field. Any advice or information found on this website should not be considered as 100% accurate and is provided on an AS-IS basis. Use any information you find here at your own risk. Click here and carefully read and agree to the DISCLAIMER statements before using any information found on this website. 
Swapping Driver And Passanger Seats/Covers
 Saturday, 13 December 2008 These statements only refer to the regular seats and not the 16 way. They have their own set of peculiarities. You can put a passenger seat on the drivers side but the handle for tilting the back portion will then be between the console and the seat. There is enough room there to still operate the handle.The seat bottom frames are the same but the back rest frames are different. On one side you have a stamped steel hinge and the other side of the seat has a tubular post with one bolt through it for the hinge mechanism. The leather covers are also different and have different part numbers. You cannot put passenger side covers on the driver side frames. Last Updated Saturday, 13 December 2008
IMPORTANT NOTICE: We are not experts or professionals in any field. Any advice or information found on this website should not be considered as 100% accurate and is provided on an AS-IS basis. Use any information you find here at your own risk. Click here and carefully read and agree to the DISCLAIMER statements before using any information found on this website. |
Help Support UsYour donation to help support the services this website provides is appreciated.
Advertisements   Latest Tips and Tutorials |
|
"On the road, Buick's Reatta has a feel of balance, security and outstanding control. The car is faithfully obedient to the slightest touch of the steering wheel, body roll is nearly nonexistent and ride quality has no harshness." Popular Mechanics - Feb. 1988 |
(Comments must be approved by the website administrator before they are published)